Precision 3D Printing Resins for Dental Applications
At AmeraLabs, we provide high-precision 3D printing resins tailored for the dental industry. Our resins are engineered to deliver exceptional detail and accuracy, ensuring that every dental model, crown, bridge, or surgical guide meets the highest standards of precision.
Trusted by 600+ Professionals in Over 50 Countries
Why Choose AmeraLabs for Dental 3D Printing?
Trusted by Dental Professionals Worldwide
EU-Made
Engineered and manufactured in Europe, our resins meet the highest standards of quality, consistency, and compliance.
ISO Certified
AmeraLabs is ISO 13485 certified, ensuring our dental 3D printing resins meet strict international standards for quality and safety in medical device manufacturing.
Professional Support
Our expert team is here to help - from material selection to print optimization. Get fast, reliable support tailored to your workflow.
Dental 3D Printing Workflow with Post-Processing
Prepare Your Model
Import the STL, orient properly, and add supports if needed. Hollow models where appropriate to save material.
Print with Correct Settings
Use validated printer settings for your specific resin and printer. Maintain room temperature around 22–25 °C.
Post-Processing Made Simple
Wash the print in isopropyl alcohol (IPA) or an approved cleaner for 2–3 minutes.
Dry thoroughly using compressed air or allow to air dry.
Post-cure under UV light as recommended (typically 5–15 minutes).
Remove supports carefully to avoid damaging model.
Polish or finish as needed, depending on application.
Quality Check and Use
Inspect for accuracy, surface finish, and stability before delivering or casting.
Fast Curing 3D Resins for Orthodontic and Dental Models
Engineered for speed and precision, our fast curing 3D resins are perfect for orthodontic, wax-up, implant, and crown and bridge models. Reliable results for every SLA and DLP dental print.
Let us know your needsDMD-21
Fast-printing dental model resin with excellent accuracy and a matte finish for easy scanning. Ideal for crowns, bridges, and aligner models in high-throughput labs.
Shop nowDMD-31
High-precision resin for detailed dental models, implant cases, and removable dies. Delivers sharp edges and consistent quality for demanding workflows.
Shop nowGVA-26
Flexible gingiva resin with natural color and excellent shape recovery. Easy to trim with dental tools after curing. Ideal for soft tissue models in dental labs.
Shop now
Resins that Enhance Your Dental 3D Printing Process
Book a Private Consultation
AmeraLabs Dental Resin Line
Engineered for precision, speed, and reliability. Our dental resins streamline lab workflows while delivering exceptional accuracy and consistent results - every print, every time.
GVA-26
Gingiva resin for gingival models
DMD-21
Orthodontic, Wax-Up, Implant, Crown and Bridge Models
DMD-31
Orthodontic, Wax-Up, Implant, Crown and Bridge Models
Frequently asked questions
Why do my dental models warp?
Warping comes from heat, sunlight, humidity, or prolonged IPA exposure. DMD-21 offers 152.2°C HDT at 0.45 MPa for stability. Store cool and dry; thermoform aligners within 24-48 hours post-cure to keep fit accurate.
How long can I store dental models?
Properly cured models stay stable for weeks in lab conditions. DMD-21 and DMD-31 minimize shrinkage and water absorption. Store away from sunlight and heat above 40°C. For aligner thermoforming, print and form within 24-48 hours.
Why aren't my crown margins sharp enough?
Blurry margins from high layer heights. Use 25-35 μm for clear crown/die details. DMD-21 and DMD-31 capture lines reliably. Balances sharpness with time; 50 μm for ortho where speed matters.
Why do my prints turn yellow after curing?
Over-curing or poor UV control causes yellowing/brittleness. Limit to 5-60 minutes under 405nm until non-tacky. DMD-21 matte resists yellowing for scanning.
Why does my gingiva mask tear when I trim it?
Low tear resistance causes tearing. GVA-26 has 37 Shore A hardness, 176.5% elongation, and 7.8 kN/m tear resistance for durable trimming. Cut/drill below 10,000 RPM. Lab simulation only.
How do I print dental models faster?
Slow resins limit throughput. At 50 μm on mono LCD, full-arch takes 45-90 minutes. DMD-21 fast exposure reduces layer times. Wash/cure adds 20-40 minutes for 2-3 hour turnaround.
Will AmeraLabs resin work with my dental printer?
Yes if 385-410nm LCD/MSLA/DLP like Phrozen, Anycubic, Elegoo, Prusa, Asiga, or SprintRay. TDS has validated settings. Professional closed systems need open-material mode enabled.
Better Prints, Made Simple!
DMD-21 LED Dental Model Resin: Printing Guide
Introduction DMD-21 is a fast-curing dental model resin for MSLA and LCD printers. It prints...
DMD-31 Resin Printing Guide
Dental Model Resin for MSLA and DLP Printers DMD-31 resin is a dental model resin...
Client Spotlight: Dragon’s Ale Minis
Introduction Isaac Cothern, the person behind Dragon’s Ale Minis, spends his working hours as a...
